Skip to content
Tseetech

TD01 60 W wireless charging module for robots and portable devices

  • # Robots

Note: Through-water performance applies to the test setup described; confirm for your operating conditions. The figures in this article (±20 mm offset, 85% @25 mm) are from the 2022 release; see the TD01 model page (/products/td01/) for current specifications.

No physical contact and no plugging: these advantages of wireless charging are now widely recognized. Compared with conventional pogo pins and plugs, wireless charging offers a better user experience and better weather resistance, and more and more industries are adopting it: robotics, e-bikes, medical devices and even subsea equipment.

After releasing the TE03 wireless charging module for e-bikes in December 2021, Tseetech’s R&D team completed a new, fully featured model, TD01, in September 2022. It is aimed at mobile medical devices, power tools and small robots.

Using loosely coupled power transfer, TD01 delivers up to 21 V / 3 A over an adjustable charging distance of 15–35 mm. Alongside high charging efficiency, it has FOD, OCP, OVP and OTP protection, making outdoor use safer. Foreign object detection, a signature feature of Tseetech’s wireless charging solutions, has also been upgraded on TD01.


TD01 wireless charging module
TD01 wireless charging module, Tseetech
TD01 wireless charging module
TD01 wireless charging module, Tseetech

Technical data

Model: TD01

  • Input: 24 V/3 A

  • Output: 20 V/3 A

  • Charging distance: 15–35 mm

  • Offset range: ±20 mm

  • Efficiency: 85% (at 25 mm)

  • Operating temperature: -20 to 55 °C

  • Dimensions:

    Tx - 90 x 90 x 17 mm

    Rx - 90 x 90 x 17 mm

  • Protection: FOD, OCP, OVP, OTP


TD01 also includes Tseetech’s foreign object detection (FOD), and the R&D team has made it more accurate than before. FOD helps keep wireless charging safe in use, and Tseetech has extended it across its power ranges.

TD01 foreign object detection test in standby
FOD test in standby
TD01 foreign object detection test during operation
FOD test in operation 1
TD01 foreign object detection test during operation
FOD test in operation 2

Power transfer through the air? TD01 also transfers power through water.

This is the most exciting result from TD01. Complex environments are a constant challenge: underwater robots and outdoor service robots need power transfer that copes with harsh conditions. We placed the TD01 module underwater and tested it thoroughly; the results were satisfactory, with stable output. This extends the range of industries Tseetech can serve.

TD01 underwater wireless charging test
Underwater test

Make your fleet charge itself

Tell us your application, power and gap — an engineer will reply with a recommendation within one business day.