Skip to content
Tseetech

FAQ

Frequently asked questions

How efficient is your wireless charging?

Efficiency depends on power level, coil gap, offset and load, so each model page lists its own figure and test conditions — e.g. TF02 reaches 93% at 30 mm. For end-to-end system efficiency (including the power supply), ask us for the test report of the model you need.

What gap and misalignment can it handle?

Gap and offset tolerance depend on the model: production models cover coil gaps of 4–40 mm — for example, the TE10B works at 14–19 mm with ±1 mm (precisely aligned wireless power supply) and the TE03 at 20–40 mm with ±20 mm. See each model page for its figures; larger gaps are available as a custom design.

What happens if a metal object enters the charging area?

Foreign object detection combines neural-network algorithms with frequency sweeping, power and Q-factor sensing. When metal or other objects are detected in the charging area, power is stopped or reduced, backed by over-voltage, over-current and over-temperature protection.

Which battery voltages are supported?

Common 12/24/36/48/60 V lithium and lead-acid packs; output voltage is configured to your battery.

How long does a custom project take?

Built on our standard platforms, a typical custom design-in takes about two months; the exact timeline depends on requirements and validation scope.

Which certifications do you hold?

Industrial platforms are designed to FCC/CE Class B EMC requirements; test and certification status is listed per model and in its test report. The company is ISO 9001/14001/45001 certified.

What is the difference between wireless charging and wireless power?

Wireless charging models include constant-current / constant-voltage (CC/CV) charge control to charge lithium or lead-acid battery packs directly. Wireless power models (such as TE03B, TE10B and TF02B) deliver a regulated DC output (e.g. 19 V, 24 V or 48 V) to power the device or its downstream power rail; if a battery is present, charge management is handled by your own BMS or charger circuit.

Does metal near the coils affect charging, and what is needed for installation?

An alternating magnetic field induces eddy currents and heating in nearby metal. Our coil assemblies include ferrite shielding on the back to guide the flux and isolate circuitry and metal chassis behind the coil. Keep the window directly between the transmitter and receiver coils non-metallic (plastic, fiberglass, acrylic, etc.) and leave the recommended clearance to surrounding metal parts; we review your 3D CAD during project evaluation and advise on mounting and shielding.

Can the charger communicate with our device controller (MCU) or BMS?

Yes. Transmitter and receiver exchange real-time status wirelessly during power transfer, and standard platforms provide RS-485 (Modbus RTU) to connect with your host controller or BMS. CAN, UART or digital I/O interfaces can be added for your project, so your system can read charging voltage, current, status and fault codes for autonomous docking and task scheduling.

Can we order standard samples for evaluation first, and what can be customized?

Yes. When a standard model (such as TD01, TD06, TE03, TE03B, TE10B, TF02 or TF02B) fits your specifications and space, you can request standard evaluation samples for bench and integration testing. When your mounting space, coil geometry, working gap, battery voltage or communication protocol requires changes, we customize on our proven TD, TE and TF platforms. A typical custom design-in takes about two months.

Make your fleet charge itself

Tell us your application, power and gap — an engineer will reply with a recommendation within one business day.