Skip to content
Tseetech

Choosing a charging method

More reliable autonomous charging, less maintenance

Contactless power transfer cuts the wear and upkeep that come with charging contacts, supports sealed designs, tolerates docking offset, and keeps robots, drones and other automated equipment reliably charged.

Where does wireless charging fit best?

01

Frequent autonomous recharging

Devices dock to recharge many times a day, and you want to do away with manual plugging and contact maintenance.

02

Sealed, easy-to-clean designs

Devices must be waterproof, dustproof or disinfected, and you want fewer exposed charging ports.

03

Docking with offset

Positioning and mechanics have tolerances, and charging must stay stable within a range of offset.

04

Hard-to-service deployments

Devices are spread out or on-site maintenance is costly, and you want to clean and replace contacts less often.

When might another charging method fit better?

If a device charges only once a day with staff on hand to plug it in (manual plug-in costs the least), needs a full battery in just a few minutes for round-the-clock continuous duty (battery swap fits better), or is strictly BOM-cost-driven with no need for sealing or maintenance-free docking (contact pads are cheaper), conventional methods are often more direct. Wireless charging shines where devices dock autonomously and often, need sealed enclosures, or must avoid contact maintenance and tight alignment.

Four ways to charge, compared

Plug-inContact padsBattery swapTseetech wireless
AutomationNeeds an automatic plug-in mechanism or an operatorCharges by autonomous dockingNeeds a swap mechanism and battery managementCharges by autonomous docking
Docking requirementConnector must mate preciselyContacts must touch reliablyBattery positioning, locking and connectionPower transfers within the allowed gap and offset
SealingConnector needs its own sealingContacts need their own protectionBattery bay needs its own sealingCharging interface can have no exposed contacts
Main maintenancePlugs, sockets and plug-in mechanismContact cleaning, oxidation and wearSwap mechanism and spare batteriesCharging area checks and system maintenance
Continuous operationStops to chargeDocks to chargeSwaps the battery and keeps workingDocks to charge; can top up between tasks

Actual performance depends on device structure, operating environment and system design. Wireless power, gap, offset and efficiency figures are subject to each model's test conditions.

What to check when evaluating wireless charging

Open the product selector →

Power

Choose a platform (TD / TE / TF) by charging power and battery voltage; models in volume production go up to 800 W; higher power is available as a custom design.

View platforms →

Efficiency

Efficiency varies with gap, offset and load; use each model's typical value at its stated gap as a reference, and validate under your own conditions.

Efficiency & testing →

Installation space

Both transmitter and receiver need mounting space, and the receiver's size and weight must fit your device.

Custom coil design →

Coil gap

Select by the real coil-to-coil gap; the model's working gap range should cover your installation gap.

Filter by coil gap →

Docking offset

Check that your device's repeatable docking error is within the model's allowed offset.

Adaptive offset control →

Cost

Wireless adds the cost of a transmitter/receiver pair; it fits best where savings in maintenance or automation cover that cost.

Assess your project →

Is wireless charging right for your device?

Tell us your power needs, installation gap, docking offset and operating environment — our engineers will help assess the fit.