
Wireless charging for drone docks
A drone manufacturer · Automatic charging for drone docks
A 340 W contactless charging solution for a drone maker's dock product. The receiver coil and circuit board weigh 50 g in total, enabling automatic charging when docked.
Application
Unattended inspection connects mission execution, return-to-dock and automatic charging. After a mission, the aircraft returns to its dock to recharge for its next task, with less on-site cable handling and fewer battery swaps.
Tseetech solution: 340 W contactless charging
Tseetech provides a contactless wireless charging solution for this drone dock. The transmitter is integrated into the dock and the receiver into the aircraft, enabling automatic charging once the aircraft is parked in position.
The project uses a 340 W wireless charging configuration. The receiver coil and circuit board weigh 50 g in total. Integration addresses the aircraft’s weight and installation-space constraints while meeting its charging requirements.
The wireless charging solution transfers energy after docking. Flight control, precision landing, dock environmental management and mission scheduling are coordinated by the complete system.
Benefits
- Connect autonomous operations: link return-to-dock with automatic charging to reduce manual charging steps between missions.
- Address onboard weight constraints: the receiver coil and circuit board total 50 g, supporting integration where weight and space are limited.
- Reduce charging-contact maintenance: contactless power transfer needs no electrical contacts to engage, clean or maintain.
- Support dock integration: transmitter and receiver are installed in the dock and aircraft respectively for charging when parked.
Project at a glance
- Application: automatic charging for drones and drone docks
- Tseetech solution scope: contactless wireless charging
- Project charging power: 340 W
- Receiver weight: 50 g, including the receiver coil and circuit board
- Status: in volume production
Power and weight refer to this project’s configuration and are subject to the delivered configuration and test conditions.
Assess wireless charging for your device
Tell us your application, power and gap — an engineer will reply with a recommendation within one business day.
