
TE16Custom-engineered
Magnetic-alignment wireless charging system
- Output power
- 100–160 W
- Output voltage
- 54.2 V DC
- Coil gap
- 4–6 mm
- Design efficiency
- 90% at 5 mm
This model is custom-engineered for each project. The figures above are design targets; final specifications are set during project assessment.
Specifications
| Applications | E-bikes (electric two-wheelers), quadruped robots |
|---|---|
| Input | 48 V DC |
| Output | 54.2 V DC, 2 A / 3 A max (can be matched to your battery) |
| Charging method | Magnetic mating, coil gap 4–6 mm |
| Lateral offset | ±2 mm |
| Design efficiency | 90% at 5 mm |
| Standby power | ≤0.5 W |
| Communication | RS-485 (Modbus RTU) |
| Protection | FOD (foreign object detection); over-voltage; over-current; over-temperature |
| Operating temperature | -20 to 45 °C |
| Dimensions | Tx board: 120×50×30 mm; Tx coil module: 106×65×12 mm Rx module: 106×65×23.5 mm |
| Compliance | Certification on request for your project |
Gap is coil-to-coil.
Make your fleet charge itself
Tell us your application, power and gap — an engineer will reply with a recommendation within one business day.