
TE03
100–200 W wireless charging system
- Output power
- 100–200 W
- Output voltage
- 14.4–54.2 V DC
- Coil gap
- 20–40 mm
- Typical efficiency
- 91% at 25 mm
Gap, voltage and form factor can be customized for your project.
Specifications
| Input | 48 V DC |
|---|---|
| Output | 14.4–54.2 V DC, about 200 W max (e.g. 29.2 V/6 A, 54.2 V/4 A), matched to the battery voltage |
| Low-voltage option | Dedicated coil for 4S Li-ion (14.4 V / 16.8 V), coil gap 15–25 mm |
| Coil gap | 20–40 mm |
| Lateral offset | ±20 mm |
| Typical efficiency | 91% at 25 mm |
| Standby power | ≤0.5 W |
| Communication | RS-485 (Modbus RTU) |
| Protection | FOD (foreign object detection); over-voltage; over-current; over-temperature |
| Operating temperature | -20 to 55 °C |
| Dimensions | Tx PCBA: 100×100×18 mm; Tx coil: 120×120×6.5 mm Rx PCBA: 90×90×18 mm; Rx coil: 120×120×6.5 mm |
| Compliance | CE-RED verification of conformity (EN IEC 62368-1, EN 301 489, EN 303 417, EN IEC 62311) |
Gap is coil-to-coil. Efficiency is typical at the stated gap; results depend on gap, offset and load. Peak values for different parameters are not necessarily achieved at the same time.
Make your fleet charge itself
Tell us your application, power and gap — an engineer will reply with a recommendation within one business day.