
Contactless charging for pool robots
A pool robot maker · Pool robot
A 70 W contactless charging system for a pool robot maker, enabling a sealed design with fewer exposed contacts in wet poolside conditions.
Application: cordless cleaning and convenient charging
Cordless pool robots automate pool cleaning and need a convenient way to recharge after each cycle. Poolside moisture and frequent handling make sealing, corrosion resistance and ease of use essential.

Illustration
Charging requirements: fewer exposed contacts
Contactless power transfer reduces the need for exposed charging contacts and makes it easier to seal the charging assembly. The design has to be matched to the enclosure, charging interface and thermal conditions, and used in its specified charging position and environment.
Tseetech solution: 70 W contactless charging
Tseetech supplies a 70 W contactless charging system for this project, built on the TD low-power platform. The coils and mechanics were designed together to meet the charging performance, installation space and sealing requirements.
The charging assembly for this project is designed to IP67, subject to the delivered specification and test reports. The rating does not apply to the complete charger.
Benefits
- Convenient charging: fewer plug-in steps and a simple way to start charging.
- Sealed integration: fewer exposed contacts make moisture- and corrosion-resistant designs easier.
- Built around the device: matched to its enclosure, power and thermal requirements.
Project at a glance
- Project power: 70 W, a project-specific configuration; the standard TD01 model is rated 60 W.
- Charging assembly: designed to IP67, subject to delivered specifications and test reports.
- Status: in volume production.
These are Tseetech project specifications. The robot is charged out of the water; this case does not describe underwater charging.
Assess wireless charging for your device
Tell us your application, power and gap — an engineer will reply with a recommendation within one business day.

